Guide

Resin Bound vs Resin Bonded: The Difference Explained

Resin bound and resin bonded sound alike but behave very differently. Compare looks, drainage, planning, cost and lifespan before choosing a resin drive.

Driveways · Updated 14 November 2026 · By the Epoxy Directory team

Resin Bound vs Resin Bonded: The Difference Explained (illustration)Illustration

Resin bound means the stone is mixed with resin first and trowelled on as a smooth, porous layer that water drains through. Resin bonded means resin is spread on the base and loose stone is scattered on top, giving a rougher, gravel-like surface that isn’t permeable. Bound is the usual choice for driveways and front gardens. Bonded is cheaper and grippier but sheds stones and doesn’t let water through.

Quick comparison

Resin bound Resin bonded
How it’s made Stone mixed in resin, trowelled flat Resin spread, stone scattered on top
Feel Smooth, no loose stones Textured, like gravel stuck down
Permeable? Yes, if the base is too No
Loose stones None when laid well Some loss over time
Typical depth Around 15 to 20 mm for drives A single layer of stone
Price Usually more Usually less
Front gardens (England) Usually meets permeable rules on a porous base May need drainage or planning

Guide price for a resin bound driveway over a sound base is £50 to £100 per m² before VAT. See resin driveway cost for more.

Resin bound in more detail

The installer mixes dried natural stone with a clear resin in a forced-action mixer, then trowels it out by hand across the base. Once cured, every stone is coated and stuck to its neighbours, but small gaps remain between them. Water drains straight through.

Pros

  • smooth, even finish that’s easy to sweep and comfortable to walk on
  • no loose stones to scatter or tread indoors
  • permeable, which helps with planning rules and puddles
  • wide choice of stone colours and blends

Cons

  • needs a sound, stable and ideally porous base
  • must be laid in dry weather within a fixed working time
  • cheaper non-UV-stable resins can darken in sunlight

Resin bonded in more detail

Resin bonded is a “scatter coat”. A layer of resin is spread over a solid base, usually tarmac or concrete. Stone is then broadcast over it while it’s wet. Once it sets, the loose stone is brushed off.

Pros

  • usually cheaper per m²
  • good grip, so useful on slopes and paths
  • quicker to lay

Cons

  • not permeable, so water runs off
  • some stones come loose over time
  • rougher underfoot and harder to sweep
  • once worn, patches of resin can show through

Which one for a driveway?

For most homes in the UK, resin bound is the better fit:

  • Drainage. It lets rain soak through, which reduces puddles and helps with planning in front gardens.
  • Looks. It gives the smooth, modern finish most people picture when they think of a resin drive.
  • Day-to-day use. No loose stones in tyre treads or on the hall carpet.

Resin bonded can make sense for a steep path where grip matters most. It can also suit a low-cost refresh of a sound tarmac drive where drainage is already handled.

Planning: why the difference matters

In England, a new or replacement hard surface over 5 m² in a front garden needs planning permission unless it’s permeable or drains onto a lawn or border on your property. Resin bound laid on a porous base usually meets this. Resin bonded doesn’t let water through, so it needs separate drainage to avoid planning permission. Wales, Scotland and Northern Ireland have their own rules. Read resin driveway planning permission before you commit.

One catch: resin bound is only permeable if the base beneath is too. Laid over solid, old tarmac or concrete, water can’t escape downwards. Ask your installer how the drive will drain.

How to tell which one you’re being quoted

Some quotes just say “resin driveway”. Ask:

  1. Is the stone mixed with the resin before laying or scattered on top?
  2. How deep is the layer?
  3. Is the finished surface permeable, including the base?
  4. Is the resin UV-stable?

If the answers are vague, ask for the system in writing. See our guide to resin flooring installer red flags for more warning signs.

Looking after each type

Both surfaces are low maintenance compared with loose gravel, but they need slightly different care.

Resin bound benefits from regular sweeping to stop dirt and leaves settling in the gaps between stones. A gentle pressure wash once or twice a year keeps the pores open so water can drain. Avoid very high pressure close to the surface.

Resin bonded needs sweeping too, especially in the first few weeks as loose stones work free. Over time, high-wear areas such as where you turn the steering wheel may need a fresh scatter coat. That’s a normal part of owning a bonded surface rather than a fault.

For both types, clear oil and fuel spills quickly and avoid using sharp shovels on snow. A plastic shovel and a little salt or grit are kinder to the surface.

FAQs

Which is more expensive, resin bound or bonded?

Resin bound usually costs more because it uses more resin and stone and takes more skill to lay. Bonded is often cheaper per m².

Can you lay resin bound over block paving?

Generally not directly, because block paving moves and has joints that can crack through. It usually needs to come up and a proper base laid.

Does resin bonded lose stones?

Some stones come loose over time, especially where tyres turn. That’s normal for bonded surfaces and one reason bound is preferred for drives.

Is resin bound really permeable?

Yes, the resin layer is. But the whole drive is only permeable if the base underneath also lets water through.

Find a checked installer near you

Ready to price up your drive? Browse resin driveway installers, search installers near you and check each firm’s Legit Score first.

Find a checked installer near you

Every firm on Epoxy Directory has a Legit Score built from evidence, not adverts.

Read next