Resin Bound vs Resin Bonded: The Difference Explained

Resin bound means the stone is mixed with resin first and trowelled on as a smooth, porous layer that water drains through. Resin bonded means resin is spread on the base and loose stone is scattered on top, giving a rougher, gravel-like surface that isn’t permeable. Bound is the usual choice for driveways and front gardens. Bonded is cheaper and grippier but sheds stones and doesn’t let water through.

Quick comparison

Resin bound Resin bonded
How it’s made Stone mixed in resin, trowelled flat Resin spread, stone scattered on top
Feel Smooth, no loose stones Textured, like gravel stuck down
Permeable? Yes, if the base is too No
Loose stones None when laid well Some loss over time
Typical depth Around 15 to 20 mm for drives A single layer of stone
Price Usually more Usually less
Front gardens (England) Usually meets permeable rules on a porous base May need drainage or planning

Guide price for a resin bound driveway over a sound base is £50 to £100 per m² before VAT. See resin driveway cost for more.

Resin bound in more detail

The installer mixes dried natural stone with a clear resin in a forced-action mixer, then trowels it out by hand across the base. Once cured, every stone is coated and stuck to its neighbours, but small gaps remain between them. Water drains straight through.

Pros

Cons

Resin bonded in more detail

Resin bonded is a “scatter coat”. A layer of resin is spread over a solid base, usually tarmac or concrete. Stone is then broadcast over it while it’s wet. Once it sets, the loose stone is brushed off.

Pros

Cons

Which one for a driveway?

For most homes in the UK, resin bound is the better fit:

Resin bonded can make sense for a steep path where grip matters most. It can also suit a low-cost refresh of a sound tarmac drive where drainage is already handled.

Planning: why the difference matters

In England, a new or replacement hard surface over 5 m² in a front garden needs planning permission unless it’s permeable or drains onto a lawn or border on your property. Resin bound laid on a porous base usually meets this. Resin bonded doesn’t let water through, so it needs separate drainage to avoid planning permission. Wales, Scotland and Northern Ireland have their own rules. Read resin driveway planning permission before you commit.

One catch: resin bound is only permeable if the base beneath is too. Laid over solid, old tarmac or concrete, water can’t escape downwards. Ask your installer how the drive will drain.

How to tell which one you’re being quoted

Some quotes just say “resin driveway”. Ask:

  1. Is the stone mixed with the resin before laying or scattered on top?
  2. How deep is the layer?
  3. Is the finished surface permeable, including the base?
  4. Is the resin UV-stable?

If the answers are vague, ask for the system in writing. See our guide to resin flooring installer red flags for more warning signs.

Looking after each type

Both surfaces are low maintenance compared with loose gravel, but they need slightly different care.

Resin bound benefits from regular sweeping to stop dirt and leaves settling in the gaps between stones. A gentle pressure wash once or twice a year keeps the pores open so water can drain. Avoid very high pressure close to the surface.

Resin bonded needs sweeping too, especially in the first few weeks as loose stones work free. Over time, high-wear areas such as where you turn the steering wheel may need a fresh scatter coat. That’s a normal part of owning a bonded surface rather than a fault.

For both types, clear oil and fuel spills quickly and avoid using sharp shovels on snow. A plastic shovel and a little salt or grit are kinder to the surface.

FAQs

Which is more expensive, resin bound or bonded?

Resin bound usually costs more because it uses more resin and stone and takes more skill to lay. Bonded is often cheaper per m².

Can you lay resin bound over block paving?

Generally not directly, because block paving moves and has joints that can crack through. It usually needs to come up and a proper base laid.

Does resin bonded lose stones?

Some stones come loose over time, especially where tyres turn. That’s normal for bonded surfaces and one reason bound is preferred for drives.

Is resin bound really permeable?

Yes, the resin layer is. But the whole drive is only permeable if the base underneath also lets water through.

Find a checked installer near you

Ready to price up your drive? Browse resin driveway installers, search installers near you and check each firm’s Legit Score first.

Resin Driveway Cost UK: Prices per m² and Real Totals

A resin bound driveway in the UK typically costs £50 to £100 per m² before VAT when it’s laid over a sound existing base. A 40 m² drive works out at roughly £2,000 to £4,000 on that basis. If your old drive has to be dug out and a new base built, expect the total to rise considerably. These are guide prices based on what UK installers publish themselves. Quotes vary with the base, the size of the drive and your region.

Quick facts

Guide price
Resin bound, over a sound base £50 to £100 per m²
40 m² drive, sound base £2,000 to £4,000
Resin bonded Usually less than bound
New sub-base Adds a lot: get it priced separately
Typical time on site 1 to 3 days for the resin layer

All prices are before VAT. See our cost guide for the published prices behind these ranges.

What’s in a resin driveway price

A resin bound driveway is a mix of dried natural stone and clear resin, trowelled by hand to a depth of around 15 to 20 mm for driveways. It sits on top of a base, usually tarmac or concrete. The price breaks down into:

The base: the biggest price swing

Laying over existing tarmac or concrete

If your current drive is sound, level and free of big cracks, an installer may be able to lay straight over it after cleaning, repairing and priming. This is the cheapest route and where the £50 to £100 per m² range applies.

Building a new base

If the existing drive is crumbling, sunken or block paving, it usually has to come out. A new base means digging out, a compacted sub-base and a porous tarmac or concrete layer. That adds groundwork, waste removal and more days on site. It can easily double the cost per m², so ask for the base to be priced as a separate line.

A resin surface is only as good as what’s underneath. Cracks and dips in the base will come through to the surface sooner or later. Our article on resin driveway problems explains why.

Bound vs bonded prices

Resin bonded is a different system: resin is spread on the base and loose stone is scattered over it. It’s often cheaper but it isn’t permeable and it has a rougher, gravel-like texture. That matters for planning rules in front gardens. We explain the difference in resin bound vs resin bonded.

Planning and extra costs to watch

If you’re surfacing more than 5 m² of a front garden in England, the surface needs to be permeable or drain onto a lawn or border. Otherwise you’ll need planning permission. A resin bound surface on a permeable base is usually fine. Resin bound laid on old impermeable tarmac or concrete may not be permeable as a whole, so ask the installer how water will drain. See resin driveway planning permission for the details.

Other costs that can catch people out:

How to compare driveway quotes

  1. Ask whether the price includes a new base. If not, ask why not.
  2. Ask how deep the resin layer will be and what stone size is used.
  3. Check the resin is UV-stable.
  4. Ask how water will drain and whether the finished drive is permeable.
  5. Ask for addresses of drives they’ve laid a year or more ago so you can see how they’ve aged.

Be wary of doorstep offers with “leftover resin” or prices that need a decision today.

Ways to keep the cost down

There are a few honest ways to get more for your money without cutting the corners that matter:

The places not to save are the base, UV-stable resin and the right depth for vehicles. These are what make a drive last. Fixing them later costs far more than getting them right first time.

FAQs

How much does a 40 m² resin driveway cost?

On a sound existing base, roughly £2,000 to £4,000 before VAT. If a new base is needed, the total will be noticeably higher.

Is resin cheaper than block paving?

Over a sound base, resin can be similar to or cheaper than block paving. If a new base is needed, the two often end up closer in price. Get both quoted on the same specification.

Can resin go over my old tarmac?

Often yes, if the tarmac is sound, level and not breaking up. An installer should check it in person and repair any cracks before laying.

How long does a resin driveway last?

A well-laid resin bound drive on a good base should last many years. Most problems come from a poor base or bad weather during laying rather than the resin itself.

Find a checked installer near you

Planning a new drive? See our resin driveway installers, search installers near you and check each firm’s Legit Score before you let anyone quote.

Do You Need Planning Permission for a Resin Driveway?

In England, you don’t need planning permission for a resin driveway in a front garden if the surface is permeable or drains onto a lawn or border on your property. You do need permission if you lay more than 5 m² of a front garden with an impermeable surface that drains towards the road. A resin bound drive on a porous base usually counts as permeable. Wales, Scotland and Northern Ireland have their own rules. Listed buildings, conservation areas and dropped kerbs can also change things.

Quick facts

Situation (England) Planning permission needed?
Front garden, permeable surface, any size Usually no
Front garden, impermeable, drains to lawn or border Usually no
Front garden, impermeable, over 5 m², drains to road Yes
Front garden, under 5 m² Usually no
Back garden Usually no, under householder rights
New dropped kerb Highways consent needed from council
Listed building or flat Check with council

This is a general guide, not legal advice. Your local planning authority has the final say.

The 5 m² rule explained

Since October 2008, the rules for householders in England changed to cut the amount of rainwater running off front gardens into drains and roads. The idea is to reduce surface water flooding.

Under these rules, you can lay a new or replacement hard surface in a front garden without planning permission if:

If neither applies and the area is over 5 m², you need planning permission. The rule covers the area between the front of the house and the road.

Is resin permeable?

It depends on the system and what it’s laid on.

Resin bound

Resin bound is a mix of stone and resin trowelled into a porous layer. Water drains through the resin itself. If it’s laid on a porous base, such as porous tarmac or a permeable sub-base, the whole drive is permeable. This is usually the simplest route to a planning-friendly resin drive.

Resin bound on an old solid base

Here’s the catch. If resin bound goes straight over old, solid tarmac or concrete, water passes through the resin but stops at the base. It then runs off the surface. Depending on the falls, that may need drainage to a border, a soakaway or a channel drain to stay within the rules.

Resin bonded

Resin bonded has stone scattered over a solid resin layer, so it isn’t permeable. It needs separate drainage to avoid planning permission on front gardens over 5 m². See resin bound vs resin bonded for the full difference.

Other things that can need permission

Dropped kerbs

If you’ll drive across a pavement or verge, you’ll usually need a dropped kerb (also called a vehicle crossover). This needs approval from your council’s highways team, whatever the driveway is made from. Some roads, such as classified roads, may also need planning permission for a new access.

Listed buildings and conservation areas

Extra controls may apply. In a conservation area, the council may have removed some permitted development rights. For listed buildings, changes to the setting can need consent.

Flats and maisonettes

Householder permitted development rights don’t apply to flats and maisonettes, so you may need permission.

Raising ground levels

Big changes in ground level or retaining walls can bring in other rules.

Wales, Scotland and Northern Ireland

The rules above are for England. The other UK nations have their own planning law:

Wherever you are, a permeable resin bound drive with good drainage is usually the safest choice. If in doubt, ask your council before work starts. Some councils offer a lawful development certificate for peace of mind.

What to ask your installer

A good installer deals with drainage and planning questions every week. Ask:

  1. Will the finished drive be permeable, including the base?
  2. Where will surface water go?
  3. Is a dropped kerb needed? Will you apply or should I?
  4. Have you laid drives in conservation areas near here?

Vague answers are a warning sign. Our questions to ask a resin flooring installer has more ideas.

A quick checklist before you book

  1. Measure the area of front garden you plan to surface.
  2. Decide whether you’ll use resin bound on a porous base or need separate drainage.
  3. Check whether your home is a listed building, a flat or in a conservation area.
  4. Check whether you need a new or wider dropped kerb.
  5. Ask your installer to explain the drainage in writing.
  6. If anything is unclear, contact your council’s planning team before work starts.

FAQs

Do I need planning permission for a resin driveway in England?

Usually not, as long as it’s permeable or drains to a lawn or border on your property. You need permission for over 5 m² of impermeable surface in a front garden that drains to the road.

Is resin bound SuDS compliant?

Resin bound on a porous base is a permeable surface, which is what sustainable drainage (SuDS) aims for. Check the base and drainage design with your installer.

Can the council make me remove a driveway?

If a drive needed planning permission and didn’t have it, the council can take enforcement action. It’s far cheaper to check first.

Do I need permission for a resin driveway in my back garden?

Usually not for a house in England, under householder permitted development, but check if you’re in a flat, a listed building or a conservation area.

Find a checked installer near you

A local installer who knows your council’s approach is worth a lot. See our resin driveway installers, search installers near you and check each firm’s Legit Score.