To price a resin flooring job, add up materials (from each product’s coverage rate), prep (grinding, repairs, damp treatment), labour (days on site, including curing gaps), machine hire and consumables, a share of your overheads and then a profit margin. Divide by the floor area to get your price per m², then check it against what other UK installers charge. Our cost guide shows UK installers publishing prices of around £40 to £135 per m² before VAT, depending on the floor type. Small jobs cost more per m² because setup and travel are fixed. Never price per m² alone without a site visit.
Why “per m²” can mislead
Customers ask for a price per m² because it’s easy to compare. But a coating on sound concrete and a metallic floor over an old tiled kitchen are very different jobs. Two rooms of the same size can take very different time and materials. Work the job out from the bottom up, then express it per m² if the customer wants that.
Step 1: Survey the floor
Before you price, visit and check:
- Area, measured properly, plus coving or upstands
- Substrate: concrete, screed, tiles, timber or old coatings
- Condition: cracks, holes, contamination, oil, old adhesive
- Moisture: test with a meter and note the result
- Temperature and access: heating, ventilation, stairs, parking, power and water
- Detailing: doors, drains, thresholds, islands and edges
- Timing: when the customer needs to walk on and use the floor
Write it down and take photos. It protects you if the job changes once you start.
Step 2: Work out materials
For each product in the system (primer, damp-proof membrane if needed, base coats, flake or quartz, topcoat), find the coverage rate on the technical data sheet. Then:
- Divide the area by the coverage to get the quantity.
- Add a waste allowance, especially on rough or porous floors.
- Round up to whole kits.
- Multiply by your trade price.
Add repair mortars, crack fillers, pigments, flakes and coving materials separately. Porous or rough floors drink primer, so be careful with thin coverage rates on old concrete.
Step 3: Price the prep
Prep is where many new installers underprice. Include:
- grinding or shot blasting time
- diamond tooling wear
- removing old coatings, tiles or adhesive
- crack and hole repairs
- damp treatment if testing shows it’s needed
- dust control and cleaning
If you hire a grinder and extractor, add the hire, delivery and fuel. If you own them, add a charge for wear and replacement.
Step 4: Count the labour days
Count days on site, not just hours working. A typical resin floor needs separate visits or long waits for:
- prep and priming
- base coats
- flake broadcast and scraping or metallic work
- topcoat
- curing time between coats
Multiply the days by your day rate for each person on the job. Your day rate needs to cover your wage, tax, pension and holidays, not just a figure that looks competitive.
Step 5: Add overheads
Overheads are the costs you pay whether you’re working or not:
- van, fuel and insurance
- business insurance
- phone, software and accountancy
- marketing and directory fees
- tools, PPE and training
- unpaid time quoting and travelling
Work out your yearly overheads and divide by the number of days you realistically expect to work. Add that to each day on site.
Step 6: Add margin and VAT
Profit margin is what’s left after all costs. It pays for callbacks, quiet weeks, new equipment and growth. Many trades aim for a margin they can live with in a bad month, not a good one.
VAT: if you’re VAT registered, add 20%. HMRC sets a turnover threshold for compulsory registration, so check the current figure on GOV.UK. Make it clear on every quote whether your price includes VAT.
A worked example (illustrative)
The figures below are made-up round numbers to show the method. They are not real material or labour prices. Use your own supplier prices and costs.
Say you’re quoting a 30 m² garage with a flake floor on sound concrete:
| Line | Illustrative figure |
|---|---|
| Materials (primer, base, flake, topcoat, with waste) | £600 |
| Grinder and extractor hire, tooling | £250 |
| Repairs and consumables | £100 |
| Labour: 3 days at your day rate | £750 |
| Overheads: 3 days at your daily share | £240 |
| Subtotal (costs) | £1,940 |
| Margin at 20% of the selling price | £485 |
| Price before VAT | £2,425 |
| Per m² | About £81 |
You then check the result against the market. In this example the figure sits inside the £60 to £100 per m² our cost guide shows for garage floors. If your number comes out far above or below the published range, look again at your costs and time. Try your own numbers in our cost calculator to see what customers will see.
Small jobs and minimum charges
A 10 m² utility room still needs a survey, travel, setup, mixing and several visits. Priced at the same rate per m² as a big garage, it can lose money. Many installers set a minimum charge that covers a full day or more. Explain it to the customer plainly.
Pricing different floor types
- Plain coatings are the quickest and usually the lowest price per m².
- Flake floors add flake, scraping and a clear topcoat.
- Metallic epoxy takes more skill, more material and more time, so it usually costs more per m².
- Polyaspartic systems can be quicker to return to use but the materials can cost more.
- Commercial floors are often cheaper per m² because the areas are large, but they bring RAMS, out-of-hours work and higher insurance.
Our homeowner guide to resin flooring cost per m² shows how these floor types compare from the customer’s side.
Common pricing mistakes
- Pricing off the phone without seeing the floor.
- Forgetting curing time and the extra visits it causes.
- Leaving out damp treatment and hoping for the best.
- Using thin coverage rates on porous concrete.
- Not charging for coving, edges and detailing.
- Matching the cheapest local quote without knowing what it includes.
Write a clear quote
A good quote wins work and avoids arguments. List the prep method, products, number of coats, thickness, what’s included and excluded, cure times, guarantee, deposit and payment terms. Customers comparing quotes can then see why yours includes proper prep.
FAQs
How do I work out a price per m² for resin flooring?
Add materials, prep, labour, hire, consumables, overheads and margin, then divide by the area. Check the result against published market prices.
What do UK installers charge per m²?
Our cost guide shows published UK prices of around £40 to £135 per m² before VAT, depending on the floor type and job size.
Should I charge a minimum for small jobs?
Many installers do, because travel, setup and curing visits cost the same whatever the size.
Should I include VAT in my quote?
If you’re VAT registered, show VAT clearly. Say whether every price is before or after VAT so customers can compare fairly.
Tell us who we’re missing
Supply resin flooring materials or run pricing and business training and aren’t on Epoxy Directory yet? Tell us and we’ll look at adding you. Already laying floors? Claim your free listing so customers can find you.



