Epoxy Garage Floor Cost in the UK: What You’ll Pay
A professionally laid epoxy garage floor in the UK typically costs £60 to £100 per m² before VAT. That puts a single garage of about 15 m² at roughly £900 to £1,500 and a double garage of about 30 m² at roughly £1,800 to £3,000. These are guide figures worked out from prices UK installers publish themselves. Your price depends on the state of the concrete, the system you choose and where you live.
Quick facts
| Typical guide price (before VAT) | |
|---|---|
| Price per m² | £60 to £100 |
| Single garage (15 m²) | £900 to £1,500 |
| Double garage (30 m²) | £1,800 to £3,000 |
| Flake finish per m² | £40 to £80 |
| Polyaspartic topcoat systems per m² | £50 to £100 (indicative) |
| Typical time on site | 1 to 3 days |
These ranges match our cost guide, which shows each published price and where it came from.
What you’re actually paying for
Most people picture the shiny top layer when they think about cost. In practice the coating is only part of the bill. A proper garage floor job usually includes:
- Preparation. Diamond grinding or shot blasting opens up the concrete so the resin can grip. It is often around a third of the job. It is also the part a cheap quote is most likely to skimp on.
- Repairs. Cracks, holes, oil-soaked patches and spalled edges need filling and treating first.
- Primer. A penetrating primer. If the slab is damp, a moisture-tolerant one.
- Body coats. One or two coats of pigmented epoxy, sometimes with decorative flakes broadcast in.
- Topcoat. A clear seal coat, often polyurethane or polyaspartic, which adds wear resistance and helps against yellowing.
- Details. Upstands or coving at the walls, edge trims at the door and clearing up.
Why small garages cost more per m²
Setting up the grinder, the vacuum, the mixing station and travelling to site costs roughly the same whether the floor is 12 m² or 40 m². So a small single garage often lands at the top of the per-m² range, while a large double garage or workshop sits nearer the bottom. Some installers also have a minimum job charge.
What pushes the price up
The condition of the slab
A sound, dry, fairly new slab is the cheapest to coat. An old garage floor with oil stains, flaking paint or a previous coating needs more grinding and repair. Old paint usually has to come off entirely because new resin is only as strong as whatever it’s stuck to.
Damp
Garages are often built without a damp-proof membrane under the slab. Moisture rising through the concrete is a leading cause of peeling and blistering. A good installer will test for it and may specify a moisture-tolerant primer or a damp-proof membrane system, which adds cost but saves the floor.
The finish you choose
A plain solid-colour coating is the cheapest. Adding flakes, a thicker build or a metallic effect costs more. A flake floor is popular in garages because it hides dust and tyre marks well. A polyaspartic topcoat adds a little to the price but cures faster and holds its colour better in sunlight. We compare the two in epoxy vs polyaspartic.
Where you live
Labour and travel costs vary across the UK. Quotes in London and the South East tend to be higher than elsewhere, though this varies by firm.
DIY kits vs a professional floor
Garage floor paint kits from DIY sheds cost a fraction of the professional price. They can look good for a while in a garage that sees little traffic. The difference usually lies in the prep and the thickness: a DIY kit is a thin coat rolled onto lightly cleaned concrete, while a pro system is ground, primed and built up in several layers. If a DIY coating fails, it normally has to be ground off before anything else goes down, so a failed kit can make the eventual professional job dearer.
How to get a fair quote
- Ask at least two or three firms. Prices for the same garage can vary a lot.
- Ask each one to visit. A quote given without seeing the slab is a guess.
- Compare like with like. Check each quote states the prep method, the number of coats, the product types and the total thickness.
- Ask about damp testing. If no one mentions moisture, ask.
- Check what’s excluded. Moving your stuff out, skip hire, edge upstands and VAT can all make a difference.
Our list of questions to ask a resin flooring installer is worth having to hand when they visit.
Is it worth it?
For most people who use their garage as a workshop, gym, utility space or a place to show off a car, a well-laid epoxy floor is good value. It seals the concrete against dust, makes oil and spills easy to wipe up and makes the space brighter. A floor that’s been prepped properly should last many years. A cheap job that skips the prep can start lifting within months, which is the most expensive outcome of all.
FAQs
How much does it cost to epoxy a single garage in the UK?
A single garage of around 15 m² typically costs £900 to £1,500 before VAT for a professional epoxy floor. Small jobs often cost more per m² because the setup costs are the same however big the floor is.
Is VAT included in garage floor prices?
Our guide prices are before VAT. Some sole traders aren’t VAT registered, so their quotes won’t add it. Always check whether a quote is plus VAT.
Can you epoxy over an old painted garage floor?
Usually the old paint has to be ground off first. New resin only bonds as well as the layer beneath it. Old garage paint is often loose in places.
How long does a garage floor take to install?
Most garages take one to three days on site, depending on the prep, the number of coats and the products used. You’ll then need to wait before parking on it.
Is a flake finish cheaper than a solid colour?
Not always. Flake floors are often quoted at £40 to £80 per m², but the flake layer and extra topcoat add labour. Ask each installer to price both if you’re unsure.
Find a checked installer near you
Ready to get quotes? Browse resin and epoxy installers near you and check each firm’s Legit Score, which shows how sure we are that a business is real and established before you invite them round.