Industrial and commercial epoxy flooring in the UK typically costs £25 to £90 per m² before VAT. A thin coating on sound warehouse concrete sits at the low end, while thicker self-levelling or heavy-duty screed systems cost more. Large floors of several hundred m² usually come in at or below the bottom of the range. These are guide prices from figures UK installers publish. Quotes vary with the system, prep, access and timing.
Quick facts
| System | What it is | Guide price per m² |
|---|---|---|
| Floor coating | Two or three thin coats rolled onto concrete | Low end of £25 to £90 |
| Coating with anti-slip | Coating with aggregate broadcast in | Low to middle |
| Self-levelling screed | Poured layer, usually a few mm thick | Middle to high |
| Heavy-duty screed | Trowelled, thicker, for heavy traffic | High end and above |
All prices are before VAT. Our cost guide shows the published prices behind these figures.
Choosing the right system
The biggest mistake businesses make is buying on price per m² without matching the system to the use. A floor that suits a clean storage area will wear through fast under forklifts.
Floor coatings
Thin epoxy coatings are the cheapest way to seal concrete, stop dust and make floors easier to clean. They suit light-traffic warehouses, storage units, plant rooms and workshops with rubber-tyred trolleys.
Self-levelling systems
A poured layer a few millimetres thick gives a smoother, flatter, harder-wearing finish. It suits production areas, showrooms, labs and food areas where a flat, seamless surface matters.
Heavy-duty screeds
Thicker trowelled or polyurethane screeds handle heavy loads, impact, hot water and chemicals. They’re common in commercial kitchens, breweries and food processing. You can read more on our commercial and industrial floors page.
What drives the cost
Prep and repairs
Shot blasting or diamond grinding is standard. Old coatings, oil-soaked concrete, damaged joints and pitted areas add time and cost.
Downtime and access
Working nights, weekends or in phases around a live site costs more. So does working around racking or fixed machinery.
Slip resistance
Wet areas need texture to meet safe slip ratings. Adding aggregate adds a little to the cost and changes how easy the floor is to clean. See is resin flooring slippery? for how slip ratings work.
Chemical and temperature resistance
Floors facing acids, oils, hot washdowns or freezers need specialist systems. Expect a higher price for these.
Line marking and extras
Walkways, bay markings, coving at the walls and drainage details are often priced separately.
How long will the floor be out of use?
This is often as important as price for a business. Standard epoxy systems may need a day or more before foot traffic and several days before heavy traffic, depending on the product and temperature. Fast-cure systems, such as polyaspartic or methyl methacrylate (MMA) resins, can be back in use much sooner but usually cost more. Our guide to epoxy floor cure times explains the stages.
Getting comparable quotes
- Describe the use in detail: traffic, loads, chemicals, cleaning methods and temperatures.
- Ask each firm to survey the floor and test for damp.
- Ask for the system name, layers and total thickness in writing.
- Ask how long until foot traffic, light vehicles and full use.
- Ask for references from similar businesses.
- Check insurance, method statements and risk assessments if your site needs them.
A worked example
Say you run a 300 m² unit used for storage and light assembly, with pallet trucks rather than forklifts. A two or three coat epoxy system on sound concrete would likely sit near the bottom of the £25 to £90 per m² range. That might mean a total in the region of £7,500 to £13,500 before VAT, depending on the prep and any repairs. Add anti-slip in the loading bay, line marking and out-of-hours working and it rises.
Now picture the same unit with daily forklift traffic. A self-levelling or screed system in the busy routes would cost more per m², but it would also last far longer under that load. Some businesses use a heavier system only in the traffic lanes and a coating elsewhere, which keeps the overall price down. Ask installers whether that kind of split would suit your site.
Maintenance costs to budget for
A resin floor in a working building needs some upkeep. Budget for regular cleaning with the right products, plus recoating the topcoat in the busiest areas every so often. Damaged patches from dropped loads or chemical spills should be repaired quickly before water gets under the coating. Ask installers what maintenance they’d expect for your use and whether they offer a recoat service. Planning this from the start makes the floor’s lifetime cost much clearer than the price per m² alone.
FAQs
How much does warehouse epoxy flooring cost per m²?
A basic epoxy coating on sound warehouse concrete usually sits at the low end of the £25 to £90 per m² range. Anti-slip finishes, repairs and out-of-hours work push it up.
Is epoxy suitable for forklift traffic?
Yes, if the system is thick enough. Thin coatings can wear in forklift routes. A self-levelling or screed system is usually better for regular heavy traffic.
Can the floor be laid while we keep trading?
Often yes, by working in sections, overnight or at weekends. This usually costs more, so plan it with the installer early.
How long does an industrial epoxy floor last?
It depends on the system and the traffic. A heavy-duty screed in the right setting can last many years. A thin coating in a heavy-use area may need recoating sooner.
Find a checked installer near you
For a business floor, it pays to check who you’re hiring. Find commercial resin installers near you and check each firm’s Legit Score before asking for a site survey.



